The house fills up next week. This weekend is for the unglamorous jobs that keep a full house safe: the dresser strapped to a stud, the toilet valve you can turn, the breaker you can find.
Below: strapping the TV and dressers to the wall, the straps to do it, stopping an overflowing toilet, a snow blower check, resetting a breaker and mapping your panel, and a 20-minute guest room.
What always breaks when your house is full? Hit reply and tell us. We read every one.
Strap the TV and Dresser to the Wall Before Thanksgiving

Image: The Home Wire
Strap your dressers, bookcases and TVs to a stud this weekend, before the little cousins arrive for Thanksgiving and before a Black Friday TV lands on a dresser. Tip-overs send an average of 17,800 people a year to the ER, and a child is treated every 53 minutes.
Of 217 tip-over deaths reported from January 2013 to July 2023, 155 (71%) were children under 18. TVs were in 103, and 90 of those 103 were kids. 44% happened in bedrooms.
What makes a piece tip: no restraint, heavy things on top, or several drawers pulled open at once.
Got a new TV coming? CPSC says to set it on a sturdy, low base when you get it home, and never on a dresser or other bedroom furniture. A flat screen mounted on the wall needs no anti-tip kit, and CPSC suggests considering a pro to mount a new one.
The strap goes into a stud, every time. Consumer Reports says never to use a drywall anchor or toggle for this. The routine, from CPSC's install guide:
Find the stud nearest the piece. Studs sit 16 or 24 inches apart.
Mark it.
Screw the furniture bracket into solid wood, as high on the piece as you can. Skip the thin back panel.
For a TV, attach the strap to the standard mounting holes on its back.
Drill into the stud. You should feel resistance the whole way; if you don't, you've missed it.
Drive a wood screw at least 2 inches long through the wall bracket into the stud.
Connect the strap and pull out the slack.
Pull the strap at the wall end, then at the furniture end. No slack and nothing moves means you're done.
Also keep toys and remotes off the top so nobody climbs for them, and store heavier things on lower shelves. Visiting family? Check the kids' room for the same hazards.
Renting? It means small screw holes, so ask your landlord first. If you can't anchor, put the TV on a sturdy, low base, push it back as far as it goes, keep cords out of reach, and keep heavy items low.
It works: tip-overs fell nearly 50% in 10 years of CPSC's Anchor It campaign. The straps for the job are just below.
Worth a Look
Straps That Keep a Dresser or TV From Tipping
For this weekend's job, the Mount-It! MI-351 Furniture Child Safety Straps are worth a look. It's a 2-pack with all the hardware included, so one box covers a dresser and the TV.
With kids visiting next week and new TVs arriving after Black Friday, the straps are the cheap part of the job. Each strap adjusts up to 12 inches and mounts to the wall or to a TV stand. The material is nylon and metal, and the maker rates it at 220 lbs without saying how it tested that.
That 12-inch reach is the catch. The piece has to sit close to the wall, so measure the gap before you order. The maker also doesn't say whether the wall hardware is meant for a stud or for drywall, so follow the stud-only routine above either way.
Mount-It's own store lists the MI-351 straps at $22.99 at time of writing; Amazon's price may differ.
We haven't installed these ourselves. The specs here come from Mount-It's store and data sheet.
Links in this post may be affiliate links. The Home Wire may earn a small commission if you buy through them, at no extra cost to you.
When the Toilet Starts to Overflow, Stop the Water First
When the bowl starts rising, stop the water before you plunge, and don't flush again. Roto-Rooter warns a second flush just adds more water to the bowl and makes the mess worse.
A full house next week means a lot more flushes, so learn this before the guests do.
Find the shutoff valve behind or beneath the toilet and turn it clockwise.
If it won't turn, lift the tank lid and push the flapper down to seal the bottom of the tank.
Lift the float so no more water flows in.
Tie the float in place before you plunge, as Mr. Rooter suggests.
Try that valve this weekend, before you need it. Benjamin Franklin Plumbing notes it can be stiff from sitting open for years, and that's better found on a quiet Saturday than mid-flood.
Then plunge it right. Use a flange plunger (the one with a soft sleeve below the cup); a standard cup plunger is for sinks, tubs and showers, per Roto-Rooter's plunger tips. Pull the flange out of the cup and seat it around the drain to make a seal. You need water in the bowl for this to work.
Give it several forceful thrusts with firm pressure both up and down. This Old House says to press in slowly and pull out quickly. Check after 15 to 20 seconds, and expect to repeat it several times.
Leave the drain snake in the garage. It will scratch a toilet's porcelain. If a few rounds of plunging don't clear it, call a plumber.
Renting? Stopping the water and plunging are yours. If it keeps overflowing, call your landlord.
Start the Snow Blower Before the First Storm Needs It

Image: The Home Wire
Fire up your snow blower this weekend, while the driveway is still bare. There were over 4,700 snow blower injuries treated in ERs in a recent year, and 36 percent of them were to the wrist, hand or finger, according to the CPSC.
A machine that sat in the shed since spring will tell you what's wrong on a calm Saturday. Find out during the first storm and you're shoveling.
Renting, or in a condo where the snow is someone else's job? Skip this one, or forward it to whoever owns the machine.
The check, from Briggs & Stratton, the Toro manual and Ariens:
Drain last season's oil.
Check the engine oil level and add oil if it's low. Recheck before each use.
Fill the tank with fresh fuel, not more than 30 days old, ideally with fuel stabilizer added.
Check the spark plug for wear or damage, and replace a worn one.
Make sure the auger moves freely.
Inspect the shear pins.
Keep a few spare shear pins on hand.
Check the drive and auger belts for cracks or fraying.
Adjust the skid shoes to your driveway surface, especially if it's gravel. They wear down and generally need a seasonal adjustment.
Start it and let it run for at least five minutes.
Engage the drive and auger a couple of times to make sure all is working.
Then carry one rule through the whole season: never use your hands to clear a clogged discharge chute. Shut off the engine, wait for all moving parts to stop, and use the clean-out tool.
Clearing the chute by hand is when most snow blower injuries happen, and the CPSC has received reports of finger amputations.
Tripped a Breaker? Reset It Right, Then Map Your Panel

Image: The Home Wire
When the oven, the slow cooker and the space heater all run at once, a breaker trips. Unplug before you reset, then map your panel this weekend so you know which switch feeds the kitchen.
GVEC, an electric co-op, says it's not unusual for breakers to trip when several power-hungry appliances share one circuit.
TLDR: amps measure how much current a circuit carries; watts measure how much power your appliances draw. An overload means the things on one circuit want more current than it can safely deliver. Per ESFI, a 15-amp circuit on a 120-volt system can carry 1,800 watts, and you shouldn't run it past 80%, or 1,440 watts.
Turn off or unplug the appliances and lamps on that circuit.
Let the breaker and wire cool, as Square D maker Schneider Electric advises.
Find the tripped breaker. It may sit in between, close to ON.
Push it fully to OFF.
Push it back to ON.
Plug the appliances back in spread across different circuits.
NC electric co-ops, quoting NFPA, say to split the appliances up to balance the load, and to skip extension cords and multi-outlet splitters in the kitchen. Repeated overloads can damage equipment and wiring over time.
Then map the panel:
Shut off one circuit.
Walk the house and note every outlet and light that went dark.
Write it next to that breaker's number.
Turn it back on and move to the next one.
If a breaker keeps tripping, ESFI's workbook says there may be a more serious issue, so call an electrician.
Renting? Resetting a breaker is yours to do. Problems with the panel itself go to your landlord.
The 20-Minute Guest Room, Starting in the Dark
Before Thanksgiving guests arrive, spend about 20 minutes on the walk from the guest bed to the bathroom. They'll make that trip half asleep in a house they don't know, so turn off the lights and walk it yourself.
The fixes, from the National Institute on Aging's room-by-room list, in the order you'll hit them:
Plug a night light in close to the bed.
Set a flashlight on the nightstand for a power outage.
Pick up books, clothes and shoes off the floor.
Push electrical cords back against the walls, out of the path.
Check that every rug on the way is fixed firmly to the floor.
Plug a motion-activated light into a hallway outlet.
Leave the bathroom light on, or use a night light that turns on automatically in the dark.
Put a nonskid mat on any bathroom floor that may get wet.
Then back to the bed for the comfort round from The Home Edit's guest room checklist. Their best line: "The floor is not a storage solution."
A spot for the luggage, a few empty hangers and one cleared drawer.
A charging spot with a spare cord.
An extra blanket by the bed.
The Wi-Fi password written on a card, so you're not reading 20 characters aloud 12 times.
Icy where you live? Treat the outdoor walkway with ice melt or sand. Renting? Everything here plugs in, lays down or lifts off, so it's all yours to do.
One quick tap
Which should we cover next?
That's Friday: strap the furniture, pick up the straps, stop the overflow, start the snow blower, map the panel and walk the guest room in the dark.
If you only do one thing this weekend, strap the TV and the tallest dresser to a stud.
Forward this to whoever in your house owns the drill.
See you Monday.
The Home Wire
This post may contain affiliate links. The Home Wire may earn a commission if you purchase through our links, at no extra cost to you. We only recommend products we believe earn their place in your home.
30 N. Gould St. Suite R Sheridan, WY 82801, United States
